Categories

Site Information

 Loading... Please wait...
  • Tartan Drone Ribbons
  • Tartan Drone Ribbons

Tartan Drone Ribbons for Bagpipes (Custom)

$75.00
SKU:
B-RIB
Quantity:

Product Description

These take 3 to 4 weeks to deliver.

Tartan drone ribbons in your tartan for your pipes! They measure at approximately 72 inches in length. We leave the two ribbons unattached since pipers have several different ways they like to attach these to their drones! This is a custom product which cannot be returned.  

Product Reviews

Write Review

  1. expensive and incomplete

    Posted by Unknown on 13th Aug 2022

    The ribbon came just as it was cut from a larger piece of tartan. There were no Velcro spacers to attach it the drones. I had previously purchased a ribbon of Stewart tartan which had the Velcro strips and was easy to use. (John's reply: This is correct on both counts. We cut these from a larger piece of tartan. We stopped putting attachments on them because 1) every piper has different spacing on drones, and 2) every piper has different preferences on how to attach, which we state on our website before purchase).

  2. Beautiful ribbons

    Posted by Don on 1st Jul 2022

    I ordered a set in Red Robertson, they are cut perfectly along the tartan and each ribbon is matched perfectly. It does take a few weeks to get them, but it's well worth the wait.

  3. Jaunty Drone Ribbons

    Posted by Jack Rhodes on 21st May 2021

    Attached these to my drones with velcro, and now my pipes look "Dressed up".

  4. Perfect

    Posted by Luke on 25th Oct 2020

    Ordered these when my kilt was purchased from J.Higgins and love having quality drone ribbons that match my kilt exactly. Having them made without Velcro or other pre-installed fastening systems make these truly customizable for each piper's setup.

  5. Great looking well made

    Posted by RONAULD Cameron on 2nd Aug 2019

    Very nice ribbons match tartan bag pretty well too. Having my tailor sew some Velcro strips on which will be ready next week.

  6. These are some nice ribbons

    Posted by IzaƤk on 16th Aug 2016

    They came as two simple, tailored strips of tartan cloth, no fastening system. Now this might be a bit of a problem if you are looking for a quick attachment. However if you can work a needle and have some time to spare, you can make your own fastening system and set it up just exactly as you would like.

    I have ordered tartan drone ribbons in the past from other vendors that did come with their own velcro attatchment system, however I tend to have my drones at around 8 inches apart, and that ribbon I ordered a while back only allowed for a 6 inch spread, but with these, you truely can customize them specifically for your needs, so I give these a high rating, 100% satisfied!